Industrial Air Compressor Installation Tips

April 30, 2021 0 Comments

So, you’ve determined you need an industrial air compressor for your facility. Whether you’re a first-timer or a veteran, deciding the proper size compressor for your facility, as well as how and where you install your air compressor, is critical to your facility’s success. Next to water, electric and gas, many companies view compressed air […]

Hybrid Manufacturer Cuts Nitrogen Costs

June 22, 2020 0 Comments

Almost by default, hybrid micro-electronic assembly producers have locked themselves into using expensive liquid nitrogen as a source for their inert gas needs. While seam-seal and some other manufacturing procedures admittedly require the 99.99 percent purity of liquid nitrogen,the largest volume of nitrogen, and thus the largest expense, is for inert gas blanketing of assemblies […]

Three Tools For Controlling an Empty Generator

July 3, 2019 0 Comments

What can be measured, can be controlled and a vacuum generator needs to be controlled to get the most out of it. To that end there are some tools that help to monitor the performance of a vacuum generator, we present some. The vacuum gauge in a vacuum generator allows us to measure the pressure. […]

Vacuum Generator: What is the difference between Types H and L?

July 3, 2019 0 Comments

Saving energy is vital when thinking about a vacuum generator. There are several options on the market such as Sullair vacuum pumps that have a high efficiency. The difference between a vacuum generator type H and an L, lies in the ability of each to generate vacuum. Let us start with the meaning of the […]

Steam Cleaning : The Best Option For The Industry

July 1, 2019 0 Comments

Steam cleaning machines were invented in the early 1980s; the objective was to devise a device that softened and disinfected the dirt, this was achieved by a jet of steam that penetrates in the form of dry steam into microscopic particles and remove the dirt from the surfaces. And while not all surfaces are suitable […]